How to Resolve Error Code Centipede in Destiny 2?

Bungie’s online first-person shooter, Destiny 2, has gained massive popularity since its release. Nevertheless, it’s not without its technical issues, just like any other online game.

In particular, the “Error Code: Centipede,” which disrupts gameplay and can occur repeatedly, is a common error encountered by players.

But, don’t worry, we have some solutions to this problem. So, let’s check out the fixes.

What is Error Code: Centipede?

There is an issue with the servers of Destiny 2 caused by the error code Centipede. Players usually experience this problem because of a problem with their internet connection or settings on their network.

Moreover, there are a variety of factors that can cause this error, such as poor internet connectivity, network configuration problems, and Bungie’s servers malfunctioning.

What are the Common Causes of Error Code: Centipede?

In order to resolve this error, it’s important to understand the common causes. It is important to identify the root cause in order to apply the most effective remedy.

You may encounter Error Code: Centipede due to the following reasons:

1. Internet Connectivity Issues: Destiny 2 may experience network errors if your internet connection is slow or unreliable.
2. NAT Type Problems: You may have trouble connecting to game servers because of network address translation (NAT) settings. Connectivity issues can arise with strict or moderate NAT types.
3. Router and Firewall Settings: It is possible for Destiny 2 to be blocked by incorrect router and firewall settings.
4. ISP Restrictions: Some Internet Service Providers (ISPs) restrict online gaming or throttle it.
5. Bungie Server Issues: There are times when the issue arises on Bungie’s end when their servers are down or are overloaded.

How to Fix Error Code Centipede in Destiny 2?

Here are some fixes that will help you fix the error code centipede in Destiny 2:

Fix 1: Update Your Game Entirely

The first thing you should do is update your game altogether in order to fix Destiny 2 error code Centipede.

As part of the in-game patching process, Bungie often adds fixes for a variety of error codes by patching in-game improvements.

In case you haven’t enabled automatic updates, follow these steps to update your game:

1. Start the Xbox One system and log into the appropriate Xbox profile.
2. To access the Settings menu, press the left D-Pad button. Click on All Settings.
3. Then click on Power & startup, and then on Power mode & startup.

4. Make sure that the Keep my console, games & apps up-to-date box is checked.

Fix 2: Restart Your Console Completely

If your console has stopped responding completely, you may use a restarting method to fix Destiny 2 error code Centipede. So, here is what you need to do:

1. Hold down the power button on the front of the Xbox console until it turns off completely.

2. Unplug the Xbox’s power brick. To clear the cache on the Xbox, press and hold the power button for a few seconds to make sure there is no battery left. Then, plug in the power cable.
3. Now, once the power brick is inserted, wait for the light on the power brick to turn orange.
4. Ensure that the error code Centipede Destiny 2 is still appearing after reopening Xbox as usual.

PlayStation 4 users who plan on playing Destiny 2 should perform a hard reset according to these instructions since PlayStation 4 does not have the option to clear the cache:

1. Ensure that PlayStation 4 is completely turned off.
2. Connect the power cord to the console and unplug it once the console has been closed completely.
3. Make sure the console is unplugged for a few minutes before using it again.
4. Using the usual method, turn on the PS4 by plugging in the power cord again.

Fix 3: Use VPN

You will most likely see one of the error codes when the Internet blocks the game from communicating with you. The best way to prevent this from happening is to use a VPN since this tool is known to be able to secure your connection.

Fix 4: Check NAT settings

When your NAT is not set to Type 1/Open, you will have difficulty communicating with Destiny 2.

With Network Address Translation, all devices on your private network are presented with a single IP address.

Ensure that your ISP configures your NAT settings if possible, since it is relatively simple to do. The steps listed below can be followed if your decision is to take matters into your own hands.

1. Using Command Prompt, run ipconfig.

2. Thereafter, find the IP address of the Default Gateway and copy it.
3. To open your router’s settings, paste the IP address into your browser.
4. Afterward, you will need to enter your network credentials.
5. Enable UPnP in the settings.

Fix 5: Port Forwarding

Due to the fact that Destiny uses some strange router ports that are quite high, port forwarding is actually a very good solution for these situations.

Some routers block these ports by default, while others do not. In order to make these changes, you will need to open the required ports on your router, if you have the necessary permissions.

To obtain a static IP for your console, we must first assign one manually to your router. The process differs slightly from Xbox One to PS4.

PlayStation:

1. It is possible for your PS4 to be permanently assigned to the IP address that it is currently using. Power up your PS4 console to find the IP address.
2. To view the status of your PlayStation 4 connection, go to Settings > Network > View Connection Status in the main menu.

3. If you want to enable port forwarding, you will need the IP address shown in the screen that opens up. Write it down somewhere safe. Don’t forget to record your PS4’s MAC address as well.

Xbox One:

Xbox One can be permanently assigned to the IP address it will be using in the future. Xbox One Dashboard provides detailed information about your current IP address. Start your Xbox One and look at the IP address.

1. Firstly, you can reach the home screen by pressing the menu button on the controller.
2. Go to Settings > Network > Advanced Settings.
3. You should be able to see your IP address in the IP settings section. It is important to note this number because you will need it later to assign an IP address.

4. Wired and Wireless MAC addresses should also be listed under IP settings. Write down your connection’s 12-digit address.

In order to collect information about the respective consoles, we first collected data. Here are the steps to assign static IP addresses to the consoles:

1. To find your Default Gateway number (IP address), open a Web browser and type it into the address bar.
2. Afterward, enter your username and password to access your router’s interface. The default username and password are usually found in the router’s documentation or on a sticker on the side. If you change your username and password and cannot recall them, reset your router.
3. You cannot apply a general rule to the screen that shows you how to add new IP addresses. It varies from router to router.
4. First, locate the Enable Manual Assignment option and select Yes. It is possible that the option has a different name or may not even exist.
5. Identify the window where you can type in your MAC address and IP address, so type in the addresses that you collected in the previous steps.
6. When you have completed that step, click the Add option, and you will have added your console’s IP address to your router.

So, that’s all we have for you on how to troubleshoot the error code centipede in Destiny 2. We hope that this guide has helped you. But, that’s not end here. Comment below and let us know if you have any further questions.